Сайт не является публичной офертой. Точную информацию о цене и наличии товаров вы можете узнать у наших менеджеров.
Работаем только по безналичному расчету с юридическими лицами! e-mail: info@officecomp.by
802.11ac + Bluetooth 4.0, 2.4 ГГц/5 ГГц, 1xWAN, 5xGigabit LAN, 1xUSB Характеристики 4G Wi-Fi роутера Teltonika RUTX12 (RUTX12010000): MOBILE Mobile module 2 x 4G (LTE) – Cat 6 up to 300 Mbps, 3G – up to 42 Mbps SIM/mobile module switch 2 SIM cards, one for each mobile module, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection (planned) Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, Mobile module in use SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to TTP, SMS to SMS, SMS auto replay, scheduled SMS (planned), SMPP (planned) Black/White list Operator black/white list Multiple PDN (planed) Possibility to use different PDNs for multiple network access and services Band management Band lock, Used band status display APN Auto APN Bridge mode Direct connection (bridge) between mobile ISP and device on LAN WIRELESS Wireless mode 802.11b/g/n/ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA) WiFi security WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation ESSID ESSID stealth mode Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing page ETHERNET WAN WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover LAN 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX BLUETOOTH Bluetooth 4.0 Bluetooth low energy (LE) for short range communication NETWORK Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) NetSnapper (optional) Mobile connection management, data compression VPN client (not available in standard FW) Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL) VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection Firewall Port forwards, traffic rules, custom rules DHCP Static and dynamic IP allocation, DHCP Relay, Relayd QoS Traffic priority queuing by source/destination (planned), service (planned), protocol or port (planned), WMM, 802.11e DDNS Supported >25 service providers, others can be configured manually Network backup VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover Load balancing Balance Internet traffic over multiple WAN connections SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW) SECURITY Authetication Pre-shared key, digital certificates, X.509 certificates Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) VLAN Port based and tag based VLAN separation Mobile quota control Custom data limits for both SIM cards WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter VPN OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC IPsec IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) GRE GRE tunnel PPTP, L2TP Client/Server instances can run simultaneously Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code DMVPN Method of building scalable IPsec VPNs SSTP SSTP client instance support MODBUS Modbus TCP slave ID filtering: Respond to one ID in range [1;255] or any Modbus TCP master Supported functions: 01, 02, 03, 04, 05, 06, 15, 16 MQTT gateway Gateway Allows sending commands and receiving data from Modbus Master trough MQTT broker Modbus data to server Protocols HTTP(S), MQTT, Azure MQTT (planned) MONITORING & MANAGEMENT WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log FOTA Firmware update from server, automatic notification SSH SSH (v1, v2) SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET CALL Reboot, Status, Mobile data on/off, Output on/off TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem MQTT MQTT Broker, MQTT publisher SNMP SNMP (v1, v2, v3), SNMP trap JSON-RPC Management API over HTTP/HTTPS Modbus Modbus TCP status/control RMS Teltonika Remote Management System (RMS) IoT PLATFORMS Clouds of things Allows monitoring of: Device data, Mobile data, Network info, Availability ThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP Azure IoT Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server SYSTEM CHARACTERISTICS CPU Quad-core ARM Cortex A7, 717 MHz RAM 256 MB, DDR3 FLASH memory 256 MB Flash FIRMWARE / CONFIGURATION WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup FOTA Update FW/configuration from server RMS Update FW/configuration for multiple devices at once Keep settings Update FW without losing current configuration FIRMWARE CUSTOMIZATION Operating system RutOS (OpenWrt based Linux OS) Supported languages Busybox shell, Lua, C, C++ Development tools SDK package with build environment provided LOCATION TRACKING GNSS GPS, GLONASS, BeiDou, Galileo and QZSS Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS NMEA NMEA 0183 Server software Supported server software: TAVL, RMS Mobile Network Geolocation Get approximate device location on RMS based on mobile cell tower position (without using GPS) Geofencing Configurable multiple geofence zones USB Data rate USB 2.0 Applications Samba share, custom scripts (planned) External devices Possibility to connect external HDD, flash drive, additional modem, printer (planned) Storage formats FAT, FAT32, NTFS INPUT/OUTPUT Input 1x Digital Input Output 1x Digital Output Events SMS, Email, RMS POWER Connector 4 pin industrial DC power socket Input voltage range 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection PoE (passive) Passive PoE. Possibility to power up through LAN1 port, not compatible with IEEE802.3af and 802.3at standards Power consumption Idle: <4 W, Max: <22 W PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) Ethernet 5 x RJ45 ports, 10/100/1000 Mbps I/Os 1 Digital Input, 1 Digital Output on 4 pin power connector Status LEDs 6 x connection status LEDs, 6 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2.4G and 5G WiFi LEDs SIM 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders Power 4 pin DC connector Antennas 4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS USB USB A port for external devices Reset Reboot/User default reset/Factory reset button PHYSICAL SPECIFICATION Casing material Full aluminium housing Dimensions (W x H x D) 132 x 44 x 95 mm Weight 540 g Mounting options DIN rail (can be mounted on two sides), flat surface placement OPERATING ENVIRONMENT Operating temperature -40 C to 75 C Operating humidity 10 % to 90 % non-condensing4G Wi-Fi роутер Teltonika RUTX12 (RUTX12010000)
Allow remote access: Allow access through WAN
Custom registers: Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
Supported data formats: 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)